Konica Minolta KIP 7100 - Manual (Page 24)

KIP Touchscreen Software
Note: *Feature Not Applicable to KIP Network Printers Only.
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2012 KIP. vii_iv
- 23 -
Press the desired original setting from one of the four diagrams. This will allow automatic image quality
adjustments for the next scan. Please note that the selection will be highlighted with a “black circle”
and the icon will become white, as in the above example “Grayscale”.
Quality
This region is used to change the image quality settings from the automatic setting.
Automatic
For most copies, “Auto” should be selected. This will allow the copier to
automatically determine the best image settings without any user intervention
(please also note “Original” in 2.2)
Density
To override the “Automatic” settings, “Density” can be adjusted. Deselect “Auto” to
enable “Density”.
Pressing the arrows manually adjusts the background density. This will suppress or
enhance the background from the original.