Konica Minolta KIP 7100 - Manual (Page 27)

KIP Touchscreen Software
Note: *Feature Not Applicable to KIP Network Printers Only.
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2012 KIP. vii_iv
- 26 -
Copy Count
In this region the number of copies, and set copy / collation can be set.
Arrows - Count Increase / Decrease
Use the arrows to increase or decrease the total numbers of copies desired by one with each press of
the button.
Number Pad - Count Increase / Decrease
Press the “number of copies” value (which is a button) to set the desired number of copies using a
number pad. This will allow the quick entry of larger numbers.
a. Press the numbers for the quantity desired. (up to 999)
b. Select “Enter”.
c. If an entry error was made press “C” to start again.
d. If you wish to close the screen without changing the quantity
press “Cancel”.