Konica Minolta KIP 7100 - Manual (Page 33)

KIP Touchscreen Software
Note: *Feature Not Applicable to KIP Network Printers Only.
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2012 KIP. vii_iv
- 32 -
Invert
Select this button to change a region of white to black and visa versa of a
scanned document. This is normally used for “negative” documents or “blue
prints”.
Copy Quality Settings
On the KIP COPY screen, it is possible to select varying copy quality settings in addition to Original type
settings.
Change Copy Quality Settings
a. Touch the arrows to select between Quality, normal and Draft.
b. Select the desired Print Quality.
• Draft mode will decrease the scanner DPI while increasing
scanning speed
• Quality mode will increase the scanner DPI while decreasing scanning speed
Note: Quality is the default value
Fold
Select “Fold” to display the fold sub screen (button will be
available if Fold option is turned on in “Configuration Screen”).
This will allow the selection of a “Fold Pattern” to be applied to
the copy.
a. Use the Arrow buttons to scroll through the available
folds and select a desired fold from the list.
b. The fold selected will be displayed in the Advanced Options section.
c. Select OK.