Konica Minolta KIP 7100 - Manual (Page 37)

KIP Touchscreen Software
Note: *Feature Not Applicable to KIP Network Printers Only.
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2012 KIP. vii_iv
- 36 -
Width
This region allows automatic or manual roll selection, roll size display,
cut sheet media, the roll amount remaining and to set the installed
media type and width.
Auto
This default setting allows the copier to automatically select the best media roll width to print the image
onto. It selects the roll noting the amount of image area to prevent surplus media consumption. (applies
to the option - two or more rolls model)
Example:
22” original
36” and 24” bond media installed
Original is 22” wide
36” installed 24” Installed
Has the best image to media fit
therefore this roll will be used
Excess non-imaged media