Konica Minolta KIP 7100 - Manual (Page 38)

KIP Touchscreen Software
Note: *Feature Not Applicable to KIP Network Printers Only.
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2012 KIP. vii_iv
- 37 -
Manual Roll Selection
To select a roll deck, press the roll deck desired. Note that the roll
information is displayed in the roll deck button.
Enabling Cutsheet
Some KIP printers are equipped with a cut sheet feeder that can be enabled in the configuration menu
of the UI.
This can be accomplished by following these steps
1. Select the (?) button in from the Home Screen of the user interface.
2. Select the Configuration 2 button from the Info/Help screen.
3. Using the Left/Right arrows located at the bottom of the page scroll to
page one (1).
4. Change the Enable Cut Sheet button to “Yes”.