Konica Minolta KIP 7100 - Manual (Page 39)

KIP Touchscreen Software
Note: *Feature Not Applicable to KIP Network Printers Only.
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2012 KIP. vii_iv
- 38 -
Cut Sheet
To copy onto a cut sheet of media:
a. Select the CUT SHEET button on the main screen.
b. Select the Output Size of the actual cut sheet
paper that will be inserted into the Cut Sheet
feeder.
c. Select desired settings from the main copy screen. Feed your original (s) into the KIP 3000.
d. Prepare Cut Sheet Feeder on your printer and WAIT until prompted by the UI.
e. Insert the media into the Cut Sheet Feeder.
Note:
Only one cut sheet may be fed at a time & this function will time out after 3 minutes if no paper is
inserted.
Note:
DO NOT insert the cut sheet media into the feeder while printing from a roll deck, as this may cause the
printer to jam.