Konica Minolta KIP 7100 - Manual (Page 41)

KIP Touchscreen Software
Note: *Feature Not Applicable to KIP Network Printers Only.
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2012 KIP. vii_iv
- 40 -
Installing Roll Media
When media is replaced or installed, a screen will automatically appear. This screen allows the setting of
the media type & width. Please see the KIP Printer manual for the procedures to replace a roll of media.
a. If no changes are required, press cancel
b. If changes are required from the currently settings displayed, select the correct media type and
size for each deck and press OK.
This screen shows 36” Film for deck one, 22” bond for Roll deck 2, 24” bond for Roll Deck 3 and 18” Bond
for Roll Deck 4.
Media types settings noted above can be changed at any time by pressing the Media button on the
main Copy Screen.