Konica Minolta KIP 7100 - Manual (Page 42)

KIP Touchscreen Software
Note: *Feature Not Applicable to KIP Network Printers Only.
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2012 KIP. vii_iv
- 41 -
Length
Two methods determine the length of the copy in the KIP printer. These two methods are Auto (may also
be known as Synchro Cut or Automatic Cut) and Standard Cut.
Auto
This mode allows the media length to be determined by the original length. This also takes into
consideration any enlargements or reductions that are applied to an image as well, to prevent excess
media without image.
Standard
This mode allows the media length to be determined by a standard length or a length set manually by
the user with a number pad.
a. Select Standard Cut. A sub screen will appear. When Standard is used, the roll must also be
selected.
If Auto Roll is selected in the Media region the following screen will appear, prompting the media
to be selected. Select the roll.
NOTE
Auto Length works in conjunction with Auto Roll
noted in 2.6.1.