Konica Minolta KIP 7100 - Manual (Page 46)

KIP Touchscreen Software
Note: *Feature Not Applicable to KIP Network Printers Only.
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2012 KIP. vii_iv
- 45 -
Auto Zoom
Press the Auto Zoom bottom to enable this function. Auto Zoom features
works in conjunction with the roll selected to scale the image to the
selected roll width.
a. If a roll is selected in the Media region the zoom from the
original will automatically fit the width of the selected roll.
b. If a roll is not selected (Auto is currently selected), roll selection is
requested prior to the function of Auto Zoom. If cut sheet is used
then it will use the values set in the Cut Sheet button in Media.
Clear
To reset the percentage value to default, select the Auto Zoom button
again.
Start
The copier is always set to “Auto Start”. That is when an originally is inserted into the KIP 3000,
it will start without other user intervention.
The start button is used when a job is recalled. The start button will “start” the job if
depressed after ‘Recall”. (The name will change to “Re-print”)
View Last
The last documented scanned to be copied be viewed.