Konica Minolta KIP 7100 - Manual (Page 47)

KIP Touchscreen Software
Note: *Feature Not Applicable to KIP Network Printers Only.
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2012 KIP. vii_iv
- 46 -
Recall Job
The last set or single copy can be recalled to be resized or to switch media type. After
a job is recalled, make the required changes and then press “Start”.
Stop / Reset
This button has two functions.
1. Press the Stop button to stop the current scan. The original will be ejected
automatically. If not, open Top Cover to remove the original.
2. Press the Reset button to restore the “default settings” in Copy Mode. Some of
the default settings are determined in the Information / Help Screen of the UI.
(see Copy Mode Configurations chapter)
Interrupt
Network printing can be interrupted between collated sets of documents. Press the
Interrupt button to pause the queue and allow a more urgent file to be copied. For
example if a file is needed right away and there is a job in the queue that has 20 sheets and 10 sets are
being printed this can be interrupted when one of the sets finishes printing. After the urgent file is printed
the sets will continue to print.
Log Off
This button only appears when “KIP Track” functions are enabled. This allows the
current user to cease all KIP printer functions after the user has performed the required
copies. (after the code was entered to enable Coping)
Please note that the KIP printer will also automatically logoff from the current user after 180 seconds of
no copy function activities by a user.