Konica Minolta KIP 7100 - Manual (Page 57)

KIP Touchscreen Software
Note: *Feature Not Applicable to KIP Network Printers Only.
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2012 KIP. vii_iv
- 56 -
Original
This region allows the setting of the Size Mode (Engineering or
Architectural) and the Original Document type.
Original Size Mode
These buttons are used to select the Size Mode of Engineering or
Architectural & Original Image type.
This will allow the automatic width detection system to determine the image width when an original is
placed in the KIP 3000.
(Eng) Engineering widths = 34, 22, 17, 11, and 8.5 inches
(Arch) Architecture widths = 36, 30, 24, 18, 12, and 9 inches
Original Type
Select one of the four different predetermined original types. The selections
are:
Line- used for simple line documents
Line / Photo- used for a combination of lines & photos documents
Grayscale- used for a combination of lines and areas of shade
(CAD) originals
Photo- used for photographic originals
Press the desired original setting from one of the four diagrams. This will allow automatic image quality
adjustments for the next scan. Please note that the selection will be highlighted with a “black” circle
and the icon will become white, as in the above example “Grayscale”.