Konica Minolta KIP 7100 - Manual (Page 67)

KIP Touchscreen Software
Note: *Feature Not Applicable to KIP Network Printers Only.
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2012 KIP. vii_iv
- 66 -
Mirror
Select this button to “mirror” a scan. This can be utilized on originals that have the
actual image on the reverse side such as older “sepia” or “film” documents.
Invert
Select this button to change a region of white to black and black to white of a
scanned document. This is normally used for “negative” documents or “blue prints”.
Stamp
Select “Stamp” to display another sub screen. This will allow the selection of a “Stamp” or “Water Mark”
to be placed on the scanned image. It will be embedded digitally into the image.
a.
Use the Arrow buttons to scroll through the available stamps
and then select the stamp from the list.
b. The Stamp button will now display the stamp selected.
NOTE
The list of “Stamps” is loaded into Scan Mode by the system administrator or
key operator. They cannot be altered or modified in any manner on the KIP