Konica Minolta KIP 7100 - Manual (Page 98)

KIP Touchscreen Software
Note: *Feature Not Applicable to KIP Network Printers Only.
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2012 KIP. vii_iv
- 97 -
Original Type
Select one of the three different predetermined original types. The selections are:
a. Line - used for simple color line documents
b. Line / Photo- used for a combination of color lines & photos
c. Photo
- used for color photographic originals
Press the desired original setting from one of the three diagrams. This will allow automatic image quality
adjustments for the scan. Please note that the selection will be highlighted with a “black circle” and the
icon will become white, as in the above example “Line/Photo”.
Print Quality
This region is used to change the image quality settings on the third party printer.
Line / Graphic Mode
The device you will copy to will determine the best setting. Each Quality mode has three sub modes.
Each mode must be calibrated prior to use. Please see Color Calibration in the “?” screen.