Konica Minolta magicolor 1690MF - Manual (Page 121)

Making Basic Copies 5-2
Making Basic Copies
This section contains descriptions of the basic copy operation procedure and
the functions that are frequently used when making copies, such as specify-
ing the zoom ratio and the copy density.
"
Before making copies, check that the Copy key is lit up in green. If the
key is not lit up in green, press the Copy key to enter Copy mode.
"
The default paper size setting can be changed with TRAY1 PAPER
SETUP in the UTILITY menu. For details, refer to “TRAY1 PAPER
SETUP Menu” on page 2-26.
If, while specifying settings, no key is pressed for the length of time specified
for
AUTO PANEL RESET , the entered settings are canceled and the main
screen (Copy mode) is displayed.
Basic Copy Operation
1
Position the document to be
copied.
"
For details on positioning
the document, refer to
“Placing a document on
the original glass” on
page 3-28 and “Loading
a document into the ADF”
on page 3-29.