Konica Minolta magicolor 1690MF - Manual (Page 190)

Maintaining the Machine 8-3
„ Do not cover the machine immediately after using it. Turn it off and wait
until it cools down.
„ Do not leave the machine’s covers open for any length of time, especially
in well-lit places; light may damage the toner cartridges.
„ Do not open the machine during printing.
„ Do not tap media stacks on the machine.
„ Do not lubricate or disassemble the machine.
„ Do not tilt the machine.
„ Do not touch the electrical contacts, gears, or laser devices. Doing so may
damage the machine and cause the print quality to deteriorate.
„ Keep media in the output tray at a minimum level. If the media is stocked
too high, your machine may experience media misfeeds and excessive
media curl.
„ When lifting the machine, grasp
the areas shown in the figure.
Keep the machine level to avoid
toner spillage.
„ Before moving the machine,
remove the dust cover, and fold
up Tray 1.
„ If the optional lower feeder unit,
attachment and duplex option
are installed, remove them and
move them separately.
„ If you get toner on your skin,
wash it off with cool water and a
mild soap.
CAUTION
If you get toner in your eyes, wash it out immediately with cool water
and consult a doctor.
„ Make sure any parts removed during cleaning are replaced before you
plug in the machine.
20.8kg
45.8 lbs