Konica Minolta magicolor 1690MF - Manual (Page 141)

Scanning With the Machine 6-8
Scanning With the Machine
The machine keys can be used to make scans. This operation differs from
scanning from a computer application since the destination of the scan data
can also be specified.
"
Before scanning, check that the Scan key is lit up in green. If the key
is not lit up in green, press the Scan key to enter Scan mode.
"
If, while specifying settings, no key is pressed for the length of time
specified for
AUTO PANEL RESET , the entered settings are can-
celed and the main screen (Scan mode) is displayed.
"
Scanning with the original glass is possible only with A4-, A5-, B5
(JIS)-, Letter- or Statement-size documents.
Scanning with the ADF is possible only with A4-, A5-, B5 (JIS)-,
Legal-, Letter- or Statement-size documents.
Basic Scanning Operation
1
Position the document to be
scanned.
"
For details on positioning
the document, refer to
“Placing a document on
the original glass” on
page 3-28 and “Loading
a document into the ADF”
on page 3-29.