Konica Minolta magicolor 1690MF - Manual (Page 123)

Making Basic Copies 5-4
Specifying the Copy Density
1
In the main screen (Copy mode), press the + or , key to select the cur-
rent copy quality setting, and then press the Select key.
2
Press the + or , key to select DENSITY , and then press the Select key.
3
Press the * or ) key to select the desired copy density, and then press
the Select key.
As the indicator is moved to right, the density becomes darker.
The main screen (Copy mode) appears again.
"
If TEXT or FINE/TEXT is selected as the copy mode, select
either AUTO or MANUAL in step 3. If MANUAL is selected, specify
the copy density.
Specifying the Zoom Ratio
The zoom ratio can be specified either by selecting a preset zoom ratio or by
specifying a custom zoom ratio.
Selecting a Preset Zoom Ratio
1
In the main screen (Copy mode), press the + or , key to select the cur-
rent zoom ratio setting, and then press the Select key.
2
Press the + or , key to select FIXED , and then press the Select key.
3
Press the + or , key to select the desired zoom ratio, and then press the
Select key.
The main screen (Copy mode) appears again.
"
The following zoom ratios can be selected.
In metric dimensions:
50%, 70% (A4
→ A5), 81% (A4 → B5), 100%, 115% (B5 → A4), 141%
(A5 → A4), 200%
In inch dimensions:
50%, 64% (LT
→ ST), 78% (LG → LT), 100%, 129% (ST → LT), 154%
(ST → LG), 200%
The zoom ratio cannot be changed using the keypad.
Specifying a Custom Zoom Ratio
1
In the main screen (Copy mode), press the + or , key to select the cur-
rent zoom ratio setting, and then press the Select key.
2
Press the + or , key to select MANUAL , and then press the Select key.