Konica Minolta magicolor 1650EN - Manual (Page 141)

Ethernet Menu 5-6
IPv4-DEFAULT ROUTER
IPv4-SUBNET MASK
IPv4-ENABLE AUTO IP
IPv6-ENABLE
Purpose Specifies the address of the router/gateway if a router/gate-
way is used on your network and you allow users outside
your network environment to print on your printer.
Range 0–255 for each xxx triplet
Use the and keys to increase or decrease each
number; use the and keys to move between trip-
lets.
Default 000.000.000.000
Purpose Specifies the subnet mask value of the network. The subnet
mask allows you to limit access to your printer (for exam-
ple, according to departmental divisions).
Range 0–255 for each xxx triplet
Use the and keys to increase or decrease each
number; use the and keys to move between trip-
lets.
Default 000.000.000.000
Purpose Select whether or not the IP address is automatically
acquired when DHCP/BOOTP and PING, ARP are not
functioning or when there is no response.
Range YES
NO
Default YES
Purpose Select whether or not to enable IPv6.
If YES is selected, IPv6 is enabled.
If NO is selected, IPv6 is disabled.
Range YES
NO
Default YES