Konica Minolta magicolor 1650EN - Manual (Page 273)

Configuring the Printer (Administrator Mode) 7-88
Reject Filter Range
1 to 5
Specify the range of IP addresses permitted
access to the printer. Type the IP address at the
beginning of the range into the box on the left,
and the IP address at the end of the range into
the box on the right.
Range: 0-255 for each xxx triplet
Default: 0.0.0.0
"
To specify a single IP address, type the
same IP address into both the box for the
starting IP address and for the ending IP
address, or type “0.0.0.0” into the box for
either the starting IP address or the ending
IP address.
"
If the starting IP address is larger than the
ending IP address, the setting is not
applied.
Submit button Saves and applies any changes made.
Reset button If you made changes to any of the parameter set-
tings but don’t wish to apply the changes, select-
ing this button restores the last submitted
parameter settings.