Konica Minolta magicolor 1650EN - Manual (Page 310)

Configuring the Printer (Administrator Mode) 7-125
Server Certificate
Check Specify the items where the server certificate is ver-
ified. Specifies the server certificate check, when
EAP Method is set to EAP-TLS, EAP-TTLS or
PEAP.
Choices: Validity, CA Confidence, ServerID
Default: [None]
Client Certificate Shows whether or not a client certificate has been
specified. A client certificate is required when EAP
Method is set to EAP-TLS, EAP-TTLS or PEAP.
"
Specify the settings from the Network - SSL/
TLS page.
Send Client Certificate Select whether or not the client certificate is sent
when the client certificate is requested by the
server. Specifies the send client certificate, when
EAP Method is set to EAP-TTLS or PEAP.
Choices: Enable, Disable
Default: Disable
Encryption Strength Specify the encryption level of TLS packets with
EAP-TLS/TTLS/PEAP. Specifies the encryption
strength, when EAP Method is set to EAP-TLS,
EAP-TTLS, or PEAP.
Choices: Low, Medium, High
Default: Low
Authentication
Process Time Limit Specify the length of time to postpone stopping the
network when authentication fails from the start of
authentication.
Range: 0, 60 - 255 (seconds)
Default: 0
Submit button Saves and applies any changes mode.
Reset button If you made changes to any of the parameter set-
tings but don’t wish to apply the changes, selecting
this button restores the last submitted parameter
settings.
Item Description