Konica Minolta magicolor 1650EN - Manual (Page 201)

Configuring the Printer (User Mode) 7-16
Tray Chaining Tray Chaining allows the printer to switch
from one paper source to another when the
initial paper source is empty. You can turn
Tray Chaining on by selecting Yes. Selecting
No turns Tray Chaining off.
Choices: Yes, No
Default: Yes
Configuration Menu Equivalent:
MAIN MENU - PAPER MENU -
INPUT TRAY - TRAY
CHAINING
"
This menu item appears only if an
optional lower feeder unit has been
installed.
Auto Continue Selects whether or not printing continues if
the size or type of paper in the selected paper
tray is different from the size or type of paper
for the print job.
Choices: Off, On
Default: Off
Configuration Menu Equivalent:
MAIN MENU - PAPER MENU -
INPUT TRAY - AUTO
CONTINUE
Custom
Paper
Size
Defaults Width Sets the width measurement for custom
paper sizes.
Range: 3.62 - 8.50" (92 - 216 mm)
Default: 3.62" (92 mm)
Configuration Menu Equivalent:
MAIN MENU - PAPER MENU -
INPUT TRAY - CUSTOM
SIZE - WIDTH(XX)
"
On the model for North America, the
settings appear in inches and the menu
item appears as WIDTH(IN). On the
models for all other regions, the
settings appear in millimeters and the
menu item appears as WIDTH(MM).
Item Description