Konica Minolta magicolor 1650EN - Manual (Page 290)

Configuring the Printer (Administrator Mode) 7-105
Read/
Write
Account User Name Specifies the reading/writing user name.
Range: Up to 32 characters
Default: restrict
"
The same name specified as the Discovery
user name cannot be used.
Authentica-
tion
Password Specifies the reading/writing user authentication
password to be used for authentication.
Range: 8 to 32 characters
Default: <Mac address>(excluding colons)
Privacy
Password Specifies the reading/writing user privacy password
to be used for privacy (encryption).
Range: 8 to 32 characters
Default: <Mac address>(excluding colons)
Security
Level Specifies the security level for reading/writing user.
Choices: noAuthNoPriv, authNoPriv, AuthPriv
Default: AuthPriv
SNMP
TRAPS Enable
Traps Specifies whether or not to permit the Trap settings
Choices: Enable, Disable
Default: Enable
Enable
Authentica-
tion
Failure
Traps Specifies whether to enable or disable the Trap set-
tings when authentication failed.
Choices: Enable, Disable
Default: Disable
Trap Com-
munity
Name 1 Specify the community name for the SNMP trap.
Range: Up to 15 characters
Default: public
Trap IP
Address 1 Specify the IP address of the SNMP trap receiver.
An IPv4 or IPv6 address or a FQDN can be speci-
fied.
Range: Up to 255 characters
Default: 0.0.0.0
Trap UDP
Port
Number 1 Specify the port number of the SNMP trap.
Range: 1 - 65535
Default: 162
Trap Com-
munity
Name 2 Specify the community name for the SNMP trap.
Range: Up to 15 characters
Default: public
Item Description