Printgroove ::admin, 3 control > queue – Konica Minolta Printgroove User Manual
Page 11
Printgroove ::Admin
Rev. 1.4
User’s Reference Guide
7
3.3.3 Control > Queue
The
Queue
module, unlike
Serve
and
Guide
, is a client server system, not a web-based
application. Because the
Printgroove
modules work in sync, the system administrator can control
user login access to the
Queue
module. Click on Queue in the modules list to view or change
Queue user login status. Again, the current status will show in the right-hand panel. Click on
Disable to prevent users from logging in to
Queue
.
Since disabling any of the modules prevents any users from logging into the application, it is
recommended that you only disable the module(s) when system use is minimal. It is also suggested
that you warn any users that you are about to shut down a module, so they may finish their work
and log off.
When a user attempts to login, or logs out immediately after a module has been disabled by
::ADMIN, they will receive a message informing them that the system is “down for maintenance.”