Konica Minolta FK-502 User Manual
Page 282
C650
10-62
Utility mode
10
5
Select the [Allow].
–
[Restrict]: PC-FAX is not received
–
[Allow]: PC-FAX is received even if any of the fax number or PC-FAX number is received and
received originals are saved in Specified User Box.
6
Select the box in which original received by PC- FAX is saved by "Receiving User Box Destination".
–
[Memory RX User Box]
It forwards to forced memory reception box.
–
[Specified User Box]
It forwards by F-Code (SUB address), which specifies the sending side.
–
For the operation at the time of PC-FAX RX, refer to "PC-FAX RX function operations" on page 1-13.
7
Whether the fax original is printed after reception is specified by "Print".
8
Whether password is checked or not is specified by "Password Check".
–
When it is set to [ON], enter the password (within 8 digits) as "Communication Password" by
keypad.
9
Touch [OK].
The settings are changed.
10
Touch [Close] until it returns to Fax/Scan screen.