Konica Minolta FK-502 - Manual (Page 356)

C650 12-7
Appendix 12
Main scanning di-
rection This is the horizontal direction for scanning originals.
Default value The setting value specified in advance when the machine was shipped from the factory. Some
default settings can be changed from the Utility mode. It is convenient when frequently used
value is set as default settings depending on the usage conditions.
Confidential com-
munication A function for sending and receiving originals to be viewed only by specific persons. The sent
confidential original is saved in a confidential box on the recipient’s fax machine and is not
printed when it is received. The received original can be printed if a specific operation is per-
formed, for example, the access code for the confidential box is entered.
Manual transmis-
sion An operation to send a fax while checking the status of the receiving machine.
Transmission reser-
vation This is a function to reserve the next transmission while current transmission or printing.
Dialing method There are three types: PB (push-button (tone) dialing), 10PPS (pulse dialing at 10 pps), and
20PPS (pulse dialing at 20 pps).
Temporary memory
reception This is a function for automatically saving the received original in the memory when the ma-
chine cannot print the received original, such as when the machine has run out of paper. When
more paper is added, the temporarily saved original is printed.
Temporary For-
ward transmission This is a function to manually forward the received original on hold, by using the setting confir-
mation button of the control panel. The transmission is used when the Fax/Scan screen is been
displayed, or the operation is being stopped due to paper misfeed or running out of paper.
Timer TX A function for sending a fax at a specified time. Sending faxes at discounted calling times, such
as late at night or early in the morning can help to reduce the transmission costs.
Address Book This is a function to register the frequently used fax number of the recipient. When destination
is to be registered, you can register the address name and the searched character. It makes
possible to specify the address using the searched character of the abbreviated selection.
Receiving This is the condition where the fax machine answers the call.
Relay distribution
station A feature to broadcast the fax to the relay distribution destination by receiving the relay request
from the relay instruction station.
Relay instruction
station The fax machine that sends the relay broadcast request.
Relay broadcast This is a function to send the broadcast the fax via other fax (called as a relay distribution sta-
tion). When there are multiple broadcast destinations at distant places, one of the broadcast
destination is specified to the relay station and the entire amount of the communication charg-
es can be reduced by doing the relay transmission from the relaying station.
Long original A setting for sending original pages longer than A3 size (420mm/16-1/2 inch). Long originals
can be transmitted by specifying the setting for long originals.
Transmission time The time needed to send a fax. The higher the resolution or larger the paper, the longer the
transmission takes.
Transmission speed Specifies the transmission speed of modem for fax.
In this function, the fax can be communicated at a high transmission speed of 33,600bps.
When overseas communication mode is set, it communicates at a high transmission speed a
with a noise of 7200bps or 4800bps.
Broadcast A transmission of a single original to many recipients in one operation.
Password transmis-
sion A function for sending a fax with a password. If the recipient’s fax machine is set for closed
network receptions, the sender’s fax machine should transmit a fax with the password same
as the closed network reception password.
Sending Making a call. It is to send an original or to dial for pollings in case of fax.
Sender name The name of this machine indicated in alphanumeric characters. This name is printed as a part
of the transmission source at the edge of the transmitted original from the recipient’s machine.
Transmission
source record When a fax has been sent, the transmission time, name, telephone number, page number that
is to be printed at the edge of the original saved on the recipient’s machine.
Sender Fax No. The identifying code for the mutual recognition when transmitting faxes. Normally the fax
number is registered as the Sender Fax No.
Sub-scanning di-
rection The vertical direction for scanning originals.
Program address This is a function for registering recipient’s fax numbers where faxes are frequently sent and
received and preset transmission operation procedures. By simply touching the program but-
ton, the address is specified and the communication can be automatically performed with the
specified functions.
Terms Explanation