Konica Minolta FK-502 - Manual (Page 49)

C650 2-7
To send a fax 2
3
Close the ADF slowly.
Faxing a multi-page original using the original glass
All pages of a multi-page original that cannot be loaded into the ADF can be faxed together using the original
glass.
1
Press [Fax/Scan] key to display the Fax/Scan screen.
2
Specify the destination.
3
Specify functions if required.
4
Load the original on the original glass, and touch [Scan
Settings], [Separate Scan], [OK] and then press [Start]
key.
5
Load the original sequentially on the original glass and press [Start] key.
– Touching [Change Setting] enables you to alter 1-Sided/2-Sided settings and Frame Erase settings.
– Repeat this operation until you have scanned the entire original you wish to send.
The scanned original is stored in the memory.
6
Touch [Finish].
7
Press [Start] key.
Transmission begins.
Sending the original using both the ADF and the original glass
Originals can be scanned using both ADF and the original glass, and large numbers of originals can be
divided into many parts, loaded in the ADF and scanned.
1
Press [Fax/Scan] key to display the Fax/Scan screen.
2
Specify the destination.
3
Specify functions if required.