Konica Minolta bizhub C25 - Manual (Page 162)

Printing With NetWare 3-3
7
In Administrator mode of PageScope Web Connection, select [NetWare]
from the [Network] tab, and then specify the following settings.
– NetWare Print: Select [Enable].
– Frame Type:
Select [Auto]. (Select the frame type according to the network
environment.)
– Mode: Select [NPrinter/RPrinter].
– Printer Name:
Specify the printer name. (Default: BHC25-XXXXXX)
– Printer Number:
Specify the printer number (0-255). When 255 is specified, the
setting is [Auto].
8
Restart the printer (turn the printer off, then on again).
9
Use the NetWare server console to display the print server screen, and
then check that the created printer is shown as [Waiting for Job] for the
connected printer (0).