Konica Minolta bizhub C25 User Manual
Page 285
Network Printing
8-38
8
Specify the folder containing the driver for a 64-bit operating system.
A dialog box appears, requesting the location of the setup information
file.
9
Click [Browse], and then select the setup information file (ntprint.inf) on
the client computer mapped as a network drive.
d
This setting is available for only PostScript driver.
–
Specify the file at the following path.
z:\Windows\System32\DriverStore\FileRepository\ntprint.inf_xxx
–
In the path mentioned above, “z” indicates the mapped network
drive. In addition, the characters indicated by “_xxx” at the end
may differ depending on the driver version.
–
Depending on the client computer being used, the setup informa-
tion file may be stored in a different location. If there is a folder
named “amd64” at the same level as “ntprint.inf”, specify the
setup information file for a 64-bit operating system located within
that folder. In addition, if the driver for a 32-bit operating system is
to be installed, specify the setup information file in the folder
named “I386” at the same level as “ntprint.inf”.
10
Click [Open].
The installation begins.
11
After the installation is completed, click [Close].
This completes the installation of the driver for a 64-bit operating system
onto the print server (32 bits).