Konica Minolta bizhub C25 - Manual (Page 471)

Configuring the Printer 9-184
Item Description
[Access Permis-
sion Address] If [Enable] is selected, the range of IP addresses
permitted access to the printer can be specified.
A maximum of five ranges of permitted IP addresses can
be specified. In addition, access from an IP address out
of the specified range is prohibited.
If [Disable] is selected, the permitted access setting is
disabled.
Choices: [Enable], [Disable]
Default: [Disable]
Configuration Menu Equivalent:
[UTILITY] - [ADMIN. MANAGEMENT] - [NETWORK
SETTING] - [IP ADDR. FILTER] - [ACCESS PER.]
[Range of IP
address permit-
ted access*] Specify the range of IP addresses permitted access to
the printer. Type the IP address at the beginning of the
range into the box on the left, and the IP address at the
end of the range into the box on the right.
Range: 0-255 for each xxx triplet
Default: [0.0.0.0]
d
To specify a single IP address, type the same IP
address into both the box for the starting IP
address and for the ending IP address, or type
[0.0.0.0] into the box for either the starting IP
address or the ending IP address.
d
If the starting IP address is larger than the ending
IP address, the setting is not applied.