Konica Minolta bizhub C25 - Manual (Page 241)

NETWORK SETTING Menu 7-10
GATEWAY
DHCP
Notes A single digit number, such as "1", cannot be input as
"001".
Align the number on the left and input "1" as "1 _ _". Use
the * and ) keys to move between triplets.
The Back key can also be used for deleting. To cancel IP
Address menu, hold down the Back key for more than one
second, and then press the Back key again after all set-
tings have been cleared.
Purpose Sets the address of the router/gateway when a router/
gateway is used on your network and you allow users out-
side your network environment to print on your machine.
Default 0.0.0.0
Range 0-255 for each xxx triplet
Use the keypad to input each number; use the * and )
keys to move between triplets.
Notes A single digit number, such as "1", cannot be input as
"001".
Align the number on the left and input "1" as "1 _ _". Use
the * and ) keys to move between triplets.
The Back key can also be used for deleting. To cancel IP
Address menu, hold down the Back key for more than one
second, and then press the Back key again after all set-
tings have been cleared.
Purpose If there is a DHCP server on the network, specifies whether
the IP address and other network information is automati-
cally assigned by the DHCP server.
Options [DISABLE]/[ENABLE]
Default [ENABLE]