Konica Minolta bizhub C25 - Manual (Page 505)

Configuring the Printer 9-218
[SNMP v1/
v2c/(IP)] [Read
Commu-
nity Name] Specifies the community name to be used for scan-
ning.
Range: 1 to 15 bytes
Default: [public]
[Write] If [Enable] is selected, Write is enabled.
Choices: [Enable], [Disable]
Default: [Enable]
[Write
Commu-
nity Name] Specifies the community name to be used for read-
ing and writing.
Range: 1 to 15 bytes
Default: [private]
[SNMP v3] [Context
Name]
Specifies the context name.
Range: Up to 63 bytes
Default: Blank
[Discov-
ery] If [Enable] is selected, Discovery is enabled.
Choices: [Enable], [Disable]
Default: [Enable]
[Discovery
User
Name] Specifies the user name for detection.
Range: 1 to 32 bytes
Default: [public]
[Read
User
Name] Specifies the name of read only user.
Range: Up to 32 bytes
Default: [initial]
d
The same name specified as the Discovery
User Name and Write User Name cannot be
used.
[Read
Security
Level] Specifies the security level for read only user.
Choices: [None], [Auth-password], [Auth-pass-
word/Priv-password]
Default: [Auth-password/Priv-password]
Item Description