Avaya T3 (IP) Compact - Manual (Page 81)

81
Customizing the telephone
Changing general settings
Direct dial
When you set this function to "off", you can type in a whole call number first and then
dial it as a block. You can then check the call number again and correct it if neces-
sary.
Press the "Menu" function key.
Scroll to the Settings menu item.
Confirm your selection.
Scroll to the Dial settings menu item.
Confirm your selection.
Scroll to the Direct dial menu item. An indication on the right hand side of the
window shows whether the function is on or off.
Switch the function on or off. The new status is displayed.
Exit menu. The new setting is saved.
Deactivating second call
Press the "Menu" function key.
Scroll to the Settings menu item.
Confirm your selection.
Scroll to the Dial settings menu item.
Confirm your selection.
Scroll to the Second call menu item. An indication on the right hand side of the
window shows whether the function is on or off.
Modify the setting The new status is displayed.
Exit menu. The new setting is saved.
i
Note
• If you are making a call and have switched off second call, a caller will receive the
busy signal.