Avaya T3 (IP) Compact - Manual (Page 84)

Changing general settings
84
Customizing the telephone
General call
An incoming external call will be signalled on all the telephones in your system if you
have not set up an answering station (general call). You can set up your telephone
so that it does not ring in the case of a general call.
Press the "Menu" function key.
Scroll to the Settings menu item.
Confirm your selection.
Scroll to the Applications menu item.
Confirm your selection.
Scroll to the General call menu item. An on/off indication on the right hand
side of the window shows whether your telephone will ring in the case of a general
call (on) or not (off).
Switch general call on or off. The new status is displayed.
Exit menu. The new setting is saved and is briefly displayed as an information
message.
Serial call
When you switch on serial call, an external party whom you have forwarded to
another extension will be switched back to you after the end of that call. You can then
forward the caller again.
Initiating serial call
Press the "Menu" function key.
Scroll to the Settings menu item.
Confirm your selection.
Scroll to the Applications menu item.
Confirm your selection.
Scroll to the Serial call menu item. An indication on the right-hand side of the
winow shows whether serial call is switched on (on) or not (off).
Switch serial call on or off. The new status is displayed.
Exit menu. The new setting is saved and is briefly displayed as an information
message.