Konica Minolta Printgroove - Manual (Page 173)

Using Printgroove POD Queue 6
Printgroove POD Queue 6-7
4
From the [All Attached Files] drop-down menu, select any of the other
attached files.
5
Click the [Download] button.
6
The Save As screen opens. Navigate to the correct storage location
then click [Save]. The file is saved in the noted location.
7
Click [Save] to close the Job Ticket Editor.
8
Open the saved file locally. If it is a PDF file, use Printgroove POD
Queue to create a New print job (see “Create a New Printgroove POD
Queue Job” on page 6-21 for complete instructions). If the download-
ed file is not PDF format, use the Printgroove Driver to submit the job
to Printgroove POD Queue. The driver automatically converts the doc-
ument to PDF. (Please see the Printgroove Driver User’s Guide for in-
structions.) Once the new job is submitted to Printgroove POD Queue,
it may be processed normally.
9
If multiple files need to be downloaded, repeat steps 4-8 for each doc-
ument.
Non-Supported Settings Detected
If the job ticket contains settings that Printgroove POD Queue does not sup-
port (Ring Binding, for example), you must review these settings and decide
how to support them before processing the print job. For complete details
about resolving these settings, please see “Resolving Non-Supported Set-
tings” on page 5-29.
6.1.3 Auto Mode
Auto Mode is a Printgroove configuration setting that can automate print job
processing. When Auto Mode is [On], Printgroove POD Queue attempts to
match the print job ticket settings with a Group. If a match is found, the job
is moved to the Group and must be manually processed. This step auto-
mates batching, allowing like jobs to collect in a single location where they
can they be processed together.
If no Group match is found, Printgroove POD Queue attempts to match the
print job to a printer or a cluster that can process all the settings. If a match
is found, Printgroove POD Queue sends the print job to the matched printer
or cluster and the job automatically queues up.
To activate Auto Mode, please see “Auto Mode Settings” on page 3-18 for
details. By default, Auto Mode is [Off].