Konica Minolta Printgroove - Manual (Page 190)

Using Printgroove POD Queue 6
Printgroove POD Queue 6-24
10
The black & white portion of the job is printed and the color pages are
inserted as required. The finishing options specified in the job ticket are
applied to each document.
11
After Job Ticket_04 prints, you receive a pop-up message that notifies
you of this situation. This allows you to track the progress of the job.
Click the [OK] button to close the pop-up notification.
12
After Job Ticket_04 finishes printing, the entire job is moved to the
Completed Jobs panel. The _01, _02, _03 and _04 information is
dropped and only the original job ticket number appears.
2
Note
If the Banner page setting is off, the Color portion will be _01 and the
black and white portion will be _02.
Quantity & Page Cluster Workflow
1
Drag-&-drop a print job onto a Quantity or Page Cluster icon in the Des-
tination panel.
2
Printgroove POD Queue splits the job into multiple sub-jobs, one for
each printer and one for each Banner page (sub-job 1 Banner page
_01, sub-job 1 _02, sub-job 2 Banner page _03, sub-job 2 _04, etc.).
3
All sub-jobs are sent simultaneously to their assigned printers and ap-
pears in the Printer Jobs panel in the folders of their assigned printers.
4
When a sub-job reaches the top of the queue, it processes. The finish-
ing settings specified in the Job Ticket are not applied in-line and must
be completed off-line. Each sub-job has a Banner page that notes any
required finishing options. These are listed under the Constraints sec-
tion of the Banner page.
5
After each sub-job prints, you may want to remove the finished pages
from a printer and set them aside until required.
6
After the last sub-job prints, the entire job is moved to the Completed
Jobs panel. The sub-job information is dropped and only the original
job ticket number appears.