Konica Minolta Printgroove User Manual
Page 44
Configuring Printgroove POD Queue
3
Printgroove POD Queue
3-23
Edit an Overage Settings
To edit a user’s account, follow this procedure:
1
From the menu select [Configuration] --> [Operation Setup] --> [Over-
age Settings]. The Overage Settings screen opens.
2
Select the value you want to modify.
3
Click the [Edit] button. The Edit Overage Setting screen opens.
4
Modify the values as required.
5
Click the [Save] button. The screen closes and the user’s account is
edited as specified.
Delete an Overage Setting
To delete an Overage Setting, follow this procedure:
1
From the menu select [Configuration] --> [Operation Setup] --> [Over-
age Settings]. The Overage Settings screen opens.
2
Select the value you want to delete.
3
Click the [Delete] button. A verification screen opens.
4
Click the [OK] button to delete the value. If you click the [Cancel] but-
ton, the request is cancelled and the value remains in the table.