Konica Minolta Magicolor 2350EN - Manual (Page 18)

Language Configuration 14
as the job sent to the printer. If the PERSONALITY variable is set to
AUTO, and no ENTER command is received, Context Language Selec-
tion (described next) is used instead of Implicit Language Selection. This
variable can be set through PJL or user interface (operator control panel
[System Default/Emulations/Default menu], CrownView, and PageScope
Light).
Context Language Selection—When the printer is configured to auto-
matically select the language of incoming jobs and the ENTER LAN-
GUAGE command is not used to identify the job language, the printer
samples the incoming data and chooses a language based on its interpre-
tation of the sampled data.