Commands 26, Initialize, Inquire – Konica Minolta Magicolor 2350EN User Manual
Page 30
Commands
26
Command
INITIALIZE
Syntax
@PJL INITIALIZE
Description This command is used to reset the PJL variables to their
factory settings.
Notes To reset the PJL variables to the User Default values, use
the DEFAULT command instead of the INITIALIZE
command.
Command
INQUIRE
Syntax
@PJL INQUIRE [LPARM : personality] variable
[<CR>]<LF>
Response
Syntax
@PJL INQUIRE [LPARM: personality] variable
<CR><LF>
value <CR><LF>
<FF>
Description This command requests the current value of a PJL
variable.
LPARM is used to request status on a particular
language-specific variable, such as PCL fonts.
Notes A question mark (?) is returned if the printer doesn’t support
the variable specified in the INQUIRE command line.
The @PJL INFO VARIABLES command returns the status
of all variables.