Environmental variables 56, Timeout, Traychain – Konica Minolta Magicolor 2350EN User Manual
Page 60: Traymapping
Environmental Variables
56
Variable
TIMEOUT
Choices/
Range
0-999
(seconds)
Default
15
Description Sets the time interval that the printer waits to receive data
for the current print job. If the wait time exceeds the value
set, the job ends and the printer is ready to accept other
jobs.
0 = no time out.
Variable
TRAYCHAIN
Choices/
Range
OFF
ON
Default
ON
Description Enables or disables tray chaining. When ON is selected,
the printer uses an alternate media tray as the media
source when the primary tray is empty.
Tray chaining occurs only if the alternate tray has the
correct media size and type installed.
Variable
TRAYMAPPING
Choices/
Range
OFF
ON
Default
ON
Description Sets tray mapping to enabled (ON) or disabled (OFF).
Notes Only supported with optional lower feeder unit and Tray 2.