Commands 27, Reset – Konica Minolta Magicolor 2350EN User Manual
Page 31
Commands
27
Command
JOB
Syntax
@PJL JOB [NAME = " job name"][START= first
page][END = last page][PASSWORD = number ]
[DISPLAY = " display text"][<CR>]<LF>
Description The JOB command signifies the beginning of a new PJL
subjob to the printer. This command should be used with
the EOJ command to frame the PJL job to prevent multiple
PJL subjobs from being treated as one job.
Notes The default settings for the optional parameters shown in
the Syntax are
NAME= N/A
START=1
END= All pages
PASSWORD=0
DISPLAY= N/A
The use of these parameters is optional.
Always use the JOB command with the EOJ command.
Command
PJL
Syntax
@PJL
Description This command signals the printer to use its PJL parser to
interpret the following command lines.
Notes This command must always immediately follow the <UEL>
command (with no white space between these two
commands).
Command
RESET
Syntax
@PJL RESET
Description Resets the command settings to the User default settings.
Notes The SET and RESET commands affect only the current
job.