Konica Minolta Magicolor 2350EN - Manual (Page 15)

PJL Command Syntax 11
PJL Command Syntax
The characters and symbols used when identifying the syntax of PJL com-
mands is defined in the following table:
Control Character Definitions
This table defines the control characters used in PJL command syntax.
[ ] Square brackets enclose any optional arguments that
can be used in conjunction with the command. If you use
optional arguments, don’t type the brackets.
< > Angled brackets enclose control characters. When these
appear in the Syntax, enter the control code only (don’t
type the <> characters). See the next section for control
character definitions.
| Vertical bars appear in command syntax to indicate that
there are multiple optional parameters.
CAPS The complete @PJL command must be in uppercase.
Control
Char-
acter Character
Descrip-
tion Hex Code ASCII Code
<CR> Carriage
Return 0x0D 13
<ESC> Escape 0x1B 27
<FF> Form Feed 0x0C 12
<HT> Horizontal
Tab
0x09 9
<LF> Line Feed 0x0A 10
<SP> Space 0x20 32
<UEL> * Universal
Exit
Language
0x1B 25 2D 31 32 33 34 35 58 27 37 45 49 50 51 52 53 88
Notes: *See “Universal Exit Language (<UEL>) Usage” on page 12 for complete
UEL usage information.