Xerox WorkCentre M24-3946 - Manual (Page 214)

9.8 Other Items
190
S
e
tti
ng up System Admi
ni
strati
on Mo
de (F
ax
F
uncti
ons)
9
5. Communication Mode
This function allows you to set the default values for the Communication Mode in the Send Options
screen.
Referring to the table below, use the numeric keypad to enter the desired value. The default value 2 is
G3 Auto.
For details on the Communication Mode, see “3.3 Selecting a Communication Mode (Communication Mode)”
(P. 25).
6. Send Header
This function allows you to set the default value of the Send Header in the Send Options screen can
be set, use the numeric keypad to enter the desired value. The default value 1 is On.
For details on Send Header, see “8.9 Transmitting Documents With Brief Information (Send Header)” (P. 105).
7. Transmission Report
This function allows you to set the default value of the Transmission Report in the Send Options
screen can be set, use the numeric keypad to enter the desired value. The default value 0 is Off.
For details on the Transmission Report, see “10.8 Transmission Report” (P. 217).
Setting value Description
2 G3 Auto
Setting value Description
0 Off
1 On
Setting value Description
0 Off
1 On