Xerox WorkCentre M24-3946 - Manual (Page 70)

4.2 Transmitting Documents Through a Relay Station (Relay Broadcast)
46
4
B
roadc
ast Sen
d
4.2.3 DTMF (Dual Tone Multi Frequency)
Method
Before using the DTMF method, program the following items.
There are two DTMF methods: automatic transmission and manual transmis-
sion.
■
Password
A two-digit number programmed beforehand.
(The factory-set default is none.) For setting Password, contact our Customer Support Center. If a
password has not been programmed, you do not need to use one.
■
Relay station ID
The last two digits of the assigning station Address Number registered at the
relay station.
■ Address Number
An Address Number for the destination station registered at the relay station.
The wildcard “
∗
”can be used.