Abcoffice, X/z management reports – ABC Office CR-2032 User Manual
Page 101
95
(Continued)
X/Z MANAGEMENT REPORTS
TO TAKE A FULL REPORT
"X" or "Z" + [AMOUNT TEND/TOTAL]
1. Turn the key to the "X" or "Z" position as desired.
2. If a Manager Password has been programmed, ENTER the (PASSWORD #), then PRESS the
[CLERK] key, or if you did NOT program a Manager Password, go to Step 3.
3. PRESS the [AMOUNT TEND/TOTAL] key.
Important:
A Full Reading must be closed out in the "Z" position.
SEE ILLUSTRATION OF A FULL REPORT ON THE NEXT PAGE.
TO TAKE A (WEEKLY or MONTHLY) FULL REPORT
"X" or "Z" + [PO] + [AMOUNT TEND/TOTAL]
1. Turn the key to the "X" or "Z" position as desired.
2. If a Manager Password has been programmed, ENTER the (PASSWORD #), then PRESS the
[CLERK] key, or if you did NOT program a Manager Password, go to Step 3.
3. PRESS
[PO], then PRESS the [AMOUNT TEND/TOTAL] key.
abcoffice
www.abcoffice.com 1-800-658-8788