4 activating a heating function, 5 steam cooking, 6 heat-up indicator – AEG BS7304021M User Manual

Page 13: Fast heat up indicator, Residual heat, 7 energy saving

Advertising
background image

heating function

Application

Steam Regenerating

To reheat your already cooked food di-
rectly on a plate.

Eco Roasting

The ECO functions let you optimize the
energy consumption during cooking. It is
necessary to set the cooking time first. To
get more information about the recom-
mended settings, refer to the cooking ta-
bles with the equivalent usual heating
function.

6.4 Activating a heating
function

1.

Activate the appliance.

2.

Select the Heating Functions menu.
Press OK to confirm.

3.

Set a heating function. Press OK to
confirm.

4.

Set the temperature. Press OK to
confirm.

Press

to go directly to the

Heating Functions menu. You
can use it when the appliance is
activated.

6.5 Steam cooking

The water drawer cover is in the control
panel.

1.

Press the cover to open the water
drawer.

2.

Fill the water drawer with 800 ml of
water.
The water supply is sufficient for ap-
proximately 50 minutes.

Do not put water directly into the
steam generator.
Use only water as the liquid. Do
not use filtered (demineralised)
or distilled water.

3.

Activate the appliance.

4.

Set the steam heating function (refer
to the “Heating functions” table)
and the temperature.

5.

If necessary, set the function Dura-
tion

or End Time

. The first

steam shows after approximately 2
minutes. An acoustic signal sounds
when the appliance is at approxi-
mately the set temperature. The sig-

nal sounds again at the end of the
cooking time.

6.

Deactivate the appliance.

When the steam generator is
empty, an acoustic signal
sounds.

When the appliance is cool, soak up all
remaining water from the steam genera-
tor with the sponge. If necessary, clean
the steam generator with vinegar. Let
the appliance dry fully with the door
open.

6.6 Heat-up indicator

When you activate a heating function,
the bar on the display comes on. The bar
shows that the temperature increases.

Fast Heat Up Indicator

This function decreases the heat-up
time. To activate the function, hold
for 3 seconds. The heat-up indicator al-
ternates.

Residual heat

When you deactivate the appliance, the
display shows the residual heat. You can
use the heat to keep the food warm.

6.7 Energy saving

The appliance contains features
which help you save energy
during everyday cooking:

Residual heat:

– When the heating function or pro-

gramme operates, the heating ele-
ments are deactivated 10% earlier

ENGLISH

13

Advertising