American Panel HURRICHILL AP120BCF1300-3 - Manual (Page 21)

AP120BC1000-3/ AP120BCF1300-3 Manual
20
AUTOMATIC HARD CYCLE PARAMETERS PROGRAMMING
After about 2 seconds the display will automatically
change to:
The LED for "A" will be "ON".
The LED'S for cycles will be blinking.
i. Press the button. The LED for "HARD" will
be steady "ON".
j. To change the temperature, press or
then press .
0 Blinks
* 0
o
F for shock freezers (AP120BCF1300-3)
10
o
F for blast chillers (AP120BC1000-3)
k. To change the temperature, press or
then press .
10 Blinks
** 10
o
F for shock freezers (AP120BCF1300-3)
20
o
F for blast chillers (AP120BC1000-3)
l. To change the temperature, press or
then press .
60 Blinks
m. To change the temperature, press or
then press .
28 Blinks
n. To change the temperature, press or
then press .
35 Blinks
o. To change the temperature, press or
then press .
40 Blinks
p. To change the temperature, press or
then press .
35 Blinks
PARAM. PROGRAMMING
AUTOMATIC HARD CYCLE
LOW AIR TEMP PART 2
28 °F
PARAM. PROGRAMMING
AUTOMATIC HARD CYCLE
BREAKING TEMP
60 °F
PARAM. PROGRAMMING
AUTOMATIC HARD CYCLE
HIGH AIR TEMP PART 1
10 °F **
PARAM. PROGRAMMING
AUTOMATIC HARD CYCLE
LOW AIR TEMP PART 1
0 °F *
PARAM. PROGRAMMING
AUTOMATIC HARD CYCLE
HIGH AIR TEMP PART 2
35 °F
PARAM. PROGRAMMING
AUTOMATIC HARD CYCLE
HARD FOOD TEMP.
40 °F
PARAM. PROGRAMMING
AUTOMATIC HARD CYCLE
HOLDING LOW TEMP.
35 °F
PARAM. PROGRAMMING
AUTOMATIC MODE
CHOOSE
PROGRAMMING CYCLE