American Panel HURRICHILL AP120BCF1300-3 - Manual (Page 25)

AP120BC1000-3/ AP120BCF1300-3 Manual
24
kk. To change the time, press or then
press .
01:30 Blinks
ll. To change the temperature, press or
then press .
35 Blinks
mm.To change the temperature, press or
then press .
42 Blinks
The display will show:
MANUAL HARD CYCLE PARAMETERS PROGRAMMING
After about 2 seconds the display will automatically
change to:
The LED for "M" will be "ON".
The LED'S for cycles will be blinking.
nn. Press the button. The LED for "HARD" will
be steady "ON".
oo. To change the temperature, press or
then press .
0 Blinks
* 0
o
F for shock freezers (AP120BCF1300-3)
10
o
F for blast chillers (AP120BC1000-3)
pp. To change the temperature, press or
then press .
10 Blinks
** 10
o
F for shock freezers (AP120BCF1300-3)
20 o F for blast chillers (AP120BC1000-3)
qq. To change the time, press or then
press .
01:00 Blinks
PARAM. PROGRAMMING
MANUAL MODE
CHOOSE
PROGRAMMING CYCLE
PARAM. PROGRAMMING
MANUAL HARD CYCLE
TIME 1
H 01:00 MIN
PARAM. PROGRAMMING
MANUAL HARD CYCLE
HIGH AIR TEMP PART 1
10 °F **
PARAM. PROGRAMMING
MANUAL HARD CYCLE
LOW AIR TEMP PART 1
0 °F *
PARAM. PROGRAMMING
MANUAL SOFT CYCLE
PROGRAMMING COMPLETE
PARAM. PROGRAMMING
MANUAL SOFT CYCLE
HOLDING HIGH TEMP
42 °F
PARAM. PROGRAMMING
MANUAL SOFT CYCLE
HOLDING LOW TEMP
35 °F
PARAM. PROGRAMMING
MANUAL SOFT CYCLE
TOTAL TIME
H 01:30 MIN