American Panel HURRICHILL AP120BCF1300-3 - Manual (Page 23)

AP120BC1000-3/ AP120BCF1300-3 Manual
22
UV LIGHT CYCLE PARAMETERS PROGRAMMING
After about 2 seconds the display will automatically
change to:
The LED for "A" will be "ON".
The LED'S for cycles will be blinking.
x. Press the button. The LED for "UV LIGHT"
will be steady "ON".
y. To change the time, press or then
press .
00:30 Blinks
The display will show:
PARAM. PROGRAMMING
AUTOMATIC MODE
CHOOSE
PROGRAMMING CYCLE
PARAM. PROGRAMMING
UV CYCLE
PROGRAMMING COMPLETE
PARAM. PROGRAMMING
UV CYCLE
CYCLE TIME
H 00:30 MIN
DEFROST CYCLE PARAMETERS PROGRAMMING
After about 2 seconds the display will automatically
change to:
The LED for "A" will be "ON".
The LED'S for cycles will be blinking.
z. Press the button. The LED for "DEFROST"
will be steady "ON".
PARAM. PROGRAMMING
AUTOMATIC MODE
CHOOSE
PROGRAMMING CYCLE
The defrost type must be left AIR FLOW.
aa. Press .
AIR FLOW
Blinks
bb. To change the time, press or then
press .
15 Blinks
cc. Press or to change to NO then press
.
NO Blinks
The display will show:
NOTE: The defrost is done by running the evaporator fan for 15 minutes with the door open.
PARAM. PROGRAMMING
DEFROST CYCLE
MANUAL DEFROST TIME
15 MIN
PARAM. PROGRAMMING
DEFROST CYCLE
CHOOSE TYPE
AIR FLOW
PARAM. PROGRAMMING
DEFROST CYCLE
PROGRAMMING COMPLETE
PARAM. PROGRAMMING
DEFROST CYCLE
AUTOMATIC DEFROST
NO