American Panel HURRICHILL AP120BCF1300-3 - Manual (Page 34)

AP120BC1000-3/ AP120BCF1300-3 Manual
33
7. HEATED FOOD PROBE
a. To select the heated food probe, press
("HEATED PROBE").
If the food probe temperature is over 30 o F, the display
will show:
After a few seconds it will go back to reading:
If the food probe temperature is les than 30
o
F, the
display will show:
b. Open the door.
c. Press the ("START/STOP") button to start the
cycle.
READY TO
START
Blinks
The display will now show:
After 5 seconds the display will show:
HEATING
COMPLET
E Blinks
OPERATING MODE
CHOOSE
OPERATING CYCLE
OPERATING MODE
CHOOSE
OPERATING CYCLE
HEATING COMPLETE
HEATED FOOD PROBE
NOT NEEDED
HEAT FOOD PROBE
OPEN THE DOOR!
EXTRACT THE PROBES
HEATING
FOOD PROBES
HEAT FOOD PROBE
READY TO START
OTE: To stop any cycle before it has finished, press ("START/STOP").
he controller will beep for a few seconds. If you still wa
to stop the cycle, press
nt
("ST If ART/STOP") again.
you do NOT want to stop, do nothing and the cycle will
continue.
U
D
NIT IN PROCESS
O YOU WANT TO STOP?