Bizfon 4000 - Manual (Page 17)

Bizfon Manual I: Installation Guide Step 2.2: System Configuration Wizard
Step 2.2: System Configuration Wizard
Select the System Configuration Wizard from the System menu. The System Configu-
ration Wizard is a tool for the administrator to define the Bizfon's Local Area Network set-
tings and to specify regional configuration settings to make Bizfon operational in its LAN.
The System Configuration Wizard must be run upon Bizfon first startup.
For the basic configuration, some pages in this wizard may be skipped and left default for
the basic configuration.
Please Note : It is strongly recommended that factory default settings are left unchanged if
their meanings are not completely understandable to the party administrating the Bizfon.
System Configuration
The first page of System Configuration Wizard shows all items to be configured. Click the
Next button to start. Enter into the Host Name field the unique name (top right corner, un-
der Bizfon logo) for the Bizfon device.
For a basic configuration, the LAN IP address does not need to be changed, but if you
must change it (for example, to integrate the device into an existing LAN), record the new
LAN IP address and have it handy. You’ll need it for subsequent access to Bizfon’s man-
agement.
Please Note: The Host Name is very useful when many Bizfon's are part of a network and
one administrator has remote access to all of them. All Bizfon pages show the hostname on
the top right corner under Bizfon logo.
Fig. I-11: System Configuration page
Clicking Next shows the page DHCP Settings for the LAN Interface.
Bizfon2000 and Bizfon4000 (SW Version 3.1.x) 17